( full specifications are in the manual for the device )
1. Ethernet-RS232(RS485) interface converter designed to connect devices with
interfaces of RS232/RS485 standards to the Ethernet TCP/IP network through the RJ45 connector.
The converter provides reception/transmission of serial packets of RS232/RS485 standards, converted into network packets
by TCP/UDP protocols.
2. The converter is two-channel, supports data exchange on both channels at the same time.
3. The Ethernet-RS232(RS485) interface converter is not a measuring device.
1. The mode of operation of the converter communication lines is duplex.
2. The converter provides data exchange via RS232 and RS485 interfaces at the selected speed
series 9600, 19200, 38400, 57600, 115200 Baud.
3. The converter is powered by an external DC source
- nominal voltage - 12 V (permissible - from 8 to 16 V)
- consumption current - no more than 300 mA.
4. The degree of protection of the converter housing against environmental influences is IP30.
5. The dimensions of the converter do not exceed 95 x 75 x 35 mm.
6. The mass of the converter does not exceed - 0.2 kg.
7. The service life of converters is 12 years.
1. The Ethernet-RS232(RS485) interface converter is made in a metal case with a bracket for mounting on a DIN rail.
At the same time, the converter must be protected from direct exposure to atmospheric precipitation.
2. Перетворювач призначений для експлуатації поза вибухонебезпечних зон в приміщеннях при температурі
навколишнього повітря від 0 до плюс 60 °C.
3. The company provides warranty service for the Ethernet-RS232(RS485) interface converter within 24 months and service
during the entire service life.
Ethernet-RS232(RS485) interface converter.
Ethernet-RS232(RS485) interface converter. Instructions for use
Configuration program "Ethernet-RS232(RS485) converter" through the Ethernet connector
Configuration program "Ethernet-RS232(RS485) converter" through the USB connector